EZoFlash форум

realy thak you very much ezo.Problem solved.i ahve a good willem again. :):)

when i active a18-31 from test hw settings pin 1 is 4.99 volt.
when i deactive it its 0 volt.
at the first post i actived all test have pin boxes.

now i changed 5v6 to 5v and i onlyactived 1 Vpp from test screen. there is 0 volt at pin 1 there is 12.87 volt at icsp pin 1 Vpp

soryy i write Vcc its Vpp is about 4,99 volt

when i actived pin 1 Vcc only there is no voltage i tried 4 different version software

100 uh coil resistance is 1.1 ohm there is a pleace writes 12v near 5.6v jumper it gives 12.8 volt

i am not using usb power its connected to 12v 1a adapter

this is same with my pcb http://img04.taobaocdn.com/bao/uploaded ... 024605.jpg

i used test mode and results here i checked cable i am using windows xp and i formatted computer again here is test results PIN -TEST ON-TEST OFF 1- 4.99 0 2- 4.99 0 3- 4.99 0 4- 4.99 0 5- 4.99 0 6- 4.99 0 7- 4.99 0 8- 4.99 0 9- 4.99 0 10- 4.99 0 11- 4.99 0 12- 4.99 0 13- 4.99 0 14- 4.99 0 15- 4.99 ...