EZoFlash форум

Please english write.

Adapter 8/16-bit Flash Board TSOP48
EN29lv640B CFeon

Universal Flash Programmer, adapter Epsilon for tsop48, selected 29lv320 for software willem 0.97ja before all ok this moment still get this error.

Hi

@Ezo

I have problem when write image to flash get this error:



I erase many times still write to half 50%.
I check diffrent flash still have same problem.

Any idea ?

Short to ground pin 13 and go to erase normal by willem and check blank test.

OK

Thx i check .

Hi

I check pin 13 connect to new jumper J8 close/open and J7 central connect.
Attache picture:

Hi @Ezo I get new adapter and have small problem ID when connect 13 pin to ground get this: Manufacture: 0x90 Device Code: 0x04 When connect 13 pin to Vcc all ok i get good statud ID : Manufacture: 0x7F Device Code: 0xCB Please help me why no get good id flash when connect to ground pin 13. I check ...

@Ezo all ok
Flash programming tuner work again
Thx for all .

BR

Deffc0n

Pin 10 is no connect. OK resume first 0-32mb i read normal next 32-64mb i connect 13 pin to resistor about 1k to Vcc capacitor. When all read i erase flash from command your pdf. Next step write this same procedure first 0-32mb write normal and next part 32-64mb by resistor about 1k to connect capac...

First block 0-32mb i R/W normal and next 32-64mb i must pin 13 flash connect Vcc (3.6V) ?
Please check my adaptor is diffrent.
Capacitor on adaptor have connect one side ground and two side is Vcc.
Attache picture.

Thx @Ezo

Thx @Ezo but still understand what is :
How use this ?


Sorry but first time R/W this flash.

OK @Ezo.

I read your pdf:
http://www.ezoflash.com/adapters/tsop48 ... _guide.pdf

and write me how read this chip EN29LV640B how many 32mb files read and next step write ?

@Ezo thx for replay what you think my adapter in photo and always get this same id ?
I buy new 2 pcs EN29LV640B clear when get i try in my adapter.
What you think my adapter ?

HI @Ezo I get this when connect ID: manufacture 0x7F and 0xCB attache screen. http://img402.imageshack.us/img402/3034/flash1g.jpg I desolder and again solder in adapter this still this same 0x7F and 0xCB. Pin 13 is connect to jumper adaptor . http://img842.imageshack.us/img842/7179/flash2q.jpg http:...