EZoFlash форум

Anyone , for sale ?

Hi all, I am not able to build by myself ezoflash programmer, I want to purchase it.
Tnx

Hi all,

Which adapter I need to erase and write this pic12f683 ?

I tried with serial but not working.

Tnx all.

hi all, I can't erase PIC16F84A, the chip was blank, I successfully programmed wit hex file,but Now I want to erase and reprogram it again. The erase button won't work. Error writting program area. What can be the problem ? I have soldered the five wires directly to the chip. Datasheet http://ww1.mi...

Hello, I need to write hex file in this pic model 18F2550-I, but I don't know which adapter to use ?

Hi all,

Can I read and write this flash chip M29W128FH with Ezoflash programmer ? It's tsop56

And Which adapter I need to perform reading.

Here is the http://www.ezoflash.com/datasheets/flas ... 8FH_FL.pdf.

I am trying to program this chip Winbond W25X080, but at the end of programming I am getting this error

Error at 0x000010 Chip=0xFF buffer=0x5A

Also this error message sometimes



Also I have tried with another chip , same problem.

Thank you Ezo Unfortunately I can't check the voltage, I can't find the VCC and GND on the adapter. I am using original manufactured tsop56a1 adapter and ezoflash v4.5. I tried your settings but I am getting the same error. I removed jumpers jp1 and jp3. On adapter I set correctly jumper jp7. Jumper...

Hello,

I am trying to erase this flash Intel 28F640J3 chip but I am getting this error "VPP Range error"


I can read the binary and save to file. But I can't erase the chip.

I am using TSOP 56_A1 adapter.

Ezo: As I remember, first time when I started spi_id_winbond.exe the chip was successfully recognized and I was getting this screen Unprotect Windbond chip - enter 'u' Protect Windobnd chip - enter 'p' Exit - enter 'x' That's the main problem I can't remove the protection. 3 pin WP is directly conne...

Ezo, thank you for the answer, I tried the russian manual but unfortunately not working. This is the id of the chip http://s5.postimage.org/dplokb63n/winbond.jpg I tried both methods with spi_id_winbond and spi_id_winbond2 and Iam getting this result. http://s5.postimage.org/f5x72g90j/ezo.jpg I can ...

Hello,

I am trying to program this chip Winbond W25X080 but I am getting this error on programming

Error at 0x00000 chip = 0x00 buffer = 0x02

How I can remove the write protection.

Utility 29C0x0.exe not working: "H/W check failed !"

Yes I solder short wires directly, works good.

Tnx

I have this bios chip, how to program it with EzoFlash 4v5 ?

I don't have 25Cxxx socket for SPI chips, Can I solder the wires directly on the chip and the Ezoflash ?