EZoFlash форум

hi
any freinds have pcb willem programmer pcb5.0f ?

It is PCB5.0F design by Fedor from Ukraina. Here is pcb45 updates and more ,initial design based on pcb40 version from Poland. Unfortunately no public version of latest pcb version available. Some early versions and discuss you can find in russian forums.
Note, that some versions are distributed unofficially, are different from original , early version with bugs and not supported by Fedor !
Fedor is visitor of my page with username fsem, his home page.

thancks
i found pcb 5.0f
you idea this version is ok i make or not ?
and i will make adapter tsop48b2 and tsop48d2 for this programmer
can working without any problem
i will not make ezowil adapter for this programmer
if you will this pcb i can give you

you idea this version is ok i make or not ?

Latest version OK. No big differencies to use it or latest generic willem (like pcb5.0b from sivava or others).

and i will make adapter tsop48b2 and tsop48d2 for this programmer

Why do not make adapters with public info for all Willem ZIF-32 based programmers ?
Now 7 years from my public tsop48d2, but still comercial T01/T07 available only.

if you will this pcb i can give you

share it to me

i not found schematic and pcb adapter tsop48 orginal willem
your adapter is good working
you have schematic adapter T01/T07 ?
or have schematic adapter tsop48 for willem programmer same as your tsop48b2 and tsop48d2 ?

i not found schematic and pcb adapter tsop48 orginal willem
your adapter is good working
you have schematic adapter T01/T07 ?
or have schematic adapter tsop48 for willem programmer same as your tsop48b2 and tsop48d2 ?

Draw your own. You can combine ready schematic from tsop48d3 or tsop48b2 +ezowill.
T01/T07 is the same tsop48d2 based. Have understanding it is easy job.

you combine this adapter ?
i combine and make pcb and give you for check

ezo please giveme schematic ezowill adapter

ezowill is public and you are able to find link in forum , here direct link
http://www.ezoflash.com/downloads/ezo_will.zip

i have this files
i need schematic not pcb

Sorry, here is no schematic at all.