EZoFlash форум

hi friend my name is Joli.im new in this forum..

i have one problem whith my willem.
i like to write e flash 28f10,i insert the flash to plcc32, click to Id and have the name 28f010.
i click blank test and is all ok.
i load the bin file to write..
but wen i click to veryfi i have e error At 0x000000 chip =0x00 buffer =0x55 and have the same problem wen click write chip.
please help me.
thank you.
best reguard .
joli.

What SW do you apply ?
Check Vpp (withou target chip, Test H/W , 1-Vpp, measure pin1 ZIF32)

i use the 0.97j sw...
i format my pc ,and now my willem dont work.
paral port of bios, you know how to set???
Now, not even recognize the eprom name.
please help me...

i use the 0.97ja sw.

Usually PC activates LPT1 port by default.
Go Test H/W and check signals starting with Vcc and Vpp. Comes voltage on ZIF pins and LED indicate ?

thanks.
I do not know how to make the H \ W test ...