EZoFlash форум

Hi, I have a Willem programmer for 4 ISPs, software 0.97ja .... I use it just for reading ... 29f010, aunts need to read 24c04 memory ... Willem Program but does not give info on all the switches on the programmer, and I still need to know the position against the 24c04 memory socket on the programmer. I am a layman :/

Could any of you make a note in the picture? position of all switches?

Thanks for the reply Libor Valenta, Czech Republic

sorry for my english

Position for chip see here.
Position for programmer, i don't know. I not use.
I use it.

I still need to know the position against the 24c04 memory socket on the programmer

You need adapter so8 150mm/ dip 8. Chip pins are 1:1 to DIP package

Willem Program but does not give info on all the switches on the programmer,

Most jumpers do not affect serial programming. Important ones are common like Vcc +5, see label on programmer bottom.
English guide here

Position for chip see here.

Datasheets are avalaible in my chip database, left, enter 24C04, find and select specific chip to have details and link to datasheet.