M29W800Ab
-
- Сообщения:43
- Зарегистрирован:Пн янв 07, 2013 3:06 pm
i would like to erase this chip but when if finish it says erase chip error. what i've to do?
-
- Сообщения:43
- Зарегистрирован:Пн янв 07, 2013 3:06 pm
Re: M29W800Ab
pcb 5.0b
software 98d12c3
no 3,3 jumper on the programmer
chip setted like 29lv800 or en29lv800
it seems there is an erase protection!
software 98d12c3
no 3,3 jumper on the programmer
chip setted like 29lv800 or en29lv800
it seems there is an erase protection!
-
- Сообщения:43
- Зарегистрирован:Пн янв 07, 2013 3:06 pm
Re: M29W800Ab
why don't you answer me???
-
- Сообщения:43
- Зарегистрирован:Пн янв 07, 2013 3:06 pm
Re: M29W800Ab
here's My Willem http://img545.imageshack.us/img545/4063/ht7e.jpg with the EEPROM m29w800ab, When I click erase, at 17% it says erase complete, but when than i try to write it says after some minutes this error http://img35.imageshack.us/img35/7638/8qij.jpg
-
- Сообщения:43
- Зарегистрирован:Пн янв 07, 2013 3:06 pm
Re: M29W800Ab
Confirm valid ID reply (!) before next actions - read, erase, program.
No valid ID - check chip pins (straight, clean) in socket (look to pins ).
Recheck all jumpers.
No valid ID - check chip pins (straight, clean) in socket (look to pins ).
Recheck all jumpers.