Is it possible to program it with a HEX file? I'm using EzoFlash 4v5
If yes, which pins of the programmer's serial connector to which PIC pins?
How to configure programmer (especially voltage jumpers)?
Thanks in advance.
PIC16F676 - what pins, what configuration?
Re: PIC16F676 - what pins, what configuration?
Look in chip test file.
Here are jumpers (Jp2,Jp3), here find pin connection to programmer and more.
As voltage accepted jumpers are Jp1,Jp3 (+5V), but found that random errors can appear. To avoid it Jp6 implemented, for +5v remove jumper Jp6 (if errors).
Hex files are accepted by willem sw, load as intel hex. I don''t know specifics related to PICs only.
Here are jumpers (Jp2,Jp3), here find pin connection to programmer and more.
As voltage accepted jumpers are Jp1,Jp3 (+5V), but found that random errors can appear. To avoid it Jp6 implemented, for +5v remove jumper Jp6 (if errors).
Hex files are accepted by willem sw, load as intel hex. I don''t know specifics related to PICs only.