Страница 1 из 1
settings of ezowilllem and tsop56a1
Добавлено: Вт май 01, 2012 9:38 pm
enie
hi ezo
i need the settings of jumpers of ezowillem and tsop56a1adapter for 28f640j3 chip to programm it thanks.
enie
Re: settings of ezowilllem and tsop56a1
Добавлено: Ср май 02, 2012 6:01 pm
Ezo
ezowill - jumpers Jp5 (default), jumper +5.0V. Remove programmer jumper open 3.6V
tsop56a1 - Jp7 (Vpp=Vcc) , no other jumpers, lines from pins 35 and 36 connected.
http://www.ezoflash.com/adapters/tsop56 ... onents.htm
SW 0.98d12c3 for pcb45c/pcb50 programmers.
Select chip Flash 28Fxx, 8/16bit LH28F160B. Get ID. Expect reply 0x89 Intel, 0x17 28F640J3.
Select chip 3.3V Flash 8/16bit Intel 28F640J3. Untick SW option 28FxxxJ3 (Write to Buffer) !
Read, erase, blank check, write, verify.
More about ezowill
http://www.ezoflash.com/downloads/ezo_will1.zip