Страница 1 из 1
[help] sst25vf080b
Добавлено: Ср мар 13, 2013 10:37 pm
phantomEVO
hi to all, i have to reprogramm i bios into an sst25vf080b: i don't understand how to connect into my programmator:
could you help me?
Re: [help] sst25vf080b
Добавлено: Ср мар 13, 2013 10:54 pm
phantomEVO
i've also this tiny adaptor: is it the correct one?
Uploaded with
ImageShack.us
how i have to solder the chip into this adapter and how ive to connect it into the programmer?
Re: [help] sst25vf080b
Добавлено: Ср мар 13, 2013 11:31 pm
Ezo
Last adapter looks OK. it should be 1:1 pin .
Adapter place in socket 25Cxxx
Remove jumper Open 3.6V
Apply SW 0.98d12c3
Re: [help] sst25vf080b
Добавлено: Ср мар 13, 2013 11:38 pm
phantomEVO
ezo if i remove the 3.6 jumper it doesn't erase the chip. if i install the 3v6 jumper it erase the chip!
HOWEVER with jumper installed, it give me an error at 99% writing! i'm trying without the jumper
Re: [help] sst25vf080b
Добавлено: Ср мар 13, 2013 11:49 pm
phantomEVO
it says "error at 0x000000 chip = 0x00 buffer = 0x02 (WHITHOUT THE JUMPER)
it says "error at 0x000000 chip = 0xFF buffer = 0x02 (WITH THE JUMPER)
HELP!
