hi guys having problems doing these chips
and them being OTP is a pain
so i believe i can swap this chip for a 29f010
so ordered some of them
but why wont my pcb5 willem flash the blank ones i have ???
i have selected the correct chip from the device
i have tried in the on board plc32 socket and in my adapter i have also
both read fine no problems
both blank check fine (blank ok)
but when i try to flash error straight away !!!
any ideas ??
ill include a couple of pics of my willem so you can see how its setup
im thinking the jumpers are setup right
ive tried with both usb and external 12v power supply
software versions tried 0.97ja & 98d12c3
puzzled.com !!
thanks
dave
27c010 will read fine but wont program !
27c010 will read fine but wont program
Hi everybody
I need to put the usbuirt device about 20 feet away from my PC.
So I was thinking about an extension.
Will it work?
Thanks for your time
Stefano.
I need to put the usbuirt device about 20 feet away from my PC.
So I was thinking about an extension.
Will it work?
Thanks for your time
Stefano.