EZoFlash форум

hi all there is new soft from sivava

this soft support more SPi device but still far from perfect
1- didn't support for SST25VFXXX
2- didn't support for ESMT F25LXXX
3- can't erase W39V040BP but can write if you erase by 0.98d8
4- there is alot of device not listed in the SW
but it's give ID For almost Winbond lpc and firmware
work with sst49lf003a without choosing 4M and offset hex 20000
just select 003 and write

http://www.darkwire.com.au/setup_PCB50_98D10.rar

didn't support for SST25VFXXX

SST25VF010A works for me.
-------

i try sst25VF040B

erase with selected sst25VF040B ok
blank error
but i selected sst25VF080B and work fine

so i program 040 by select 080 for erase and write
and go back for select 040 for verify

... did you try at45 with different pin out or not
and what about Esmt25
and AT26