EZoFlash форум

Hy! My name is Bogdan. I built Ezoflash 4.5. but i cannot manage it to work. When i plug paralel cable to ezo red led powers on. Then i start program and when i plug dc adapter to ezo the red led is lighting more powerful. When i do test hardware it returns with an error. Chek conection or power. Al the IC are powered with meassured 5 v. I cheked the PCB and found no error. I dont know what it can be wrong. Please help me! I have to program a winbound and i cannot use my ezo. Please help. Thanks in advance!

1. Visual check - solderings , components (types, orientation)
2. Voltages check with power supply only
3. Programmer signal voltage measures in Test H/W one by one
4. Programmer output check with empty read
Details http://www.ezoflash.com/downloads/4v5_install_test.zip
Come back with report at fail step

hi, the giro-z transponder i have is not working, i checked it with camera, and no IR light is on. i change cable, to a newer one and its still not working.


can you tell me whats the problem? the transponder run right the previous days.