Страница 1 из 1

EZoser2 programmer

Добавлено: Ср ноя 17, 2010 5:00 pm
tps_star
hi ezo
ezoser programmer v2 can working with lates software 0.98d12c3 or 0.97d12c3 ?
and this programmer program spi flash witout any problem ?

Re: EZoser2 programmer

Добавлено: Ср ноя 17, 2010 5:25 pm
Ezo
Here is no attempts to improve existing version.
SPI FLash is working on 25xxxx DIP socket , no direct compatibility wit ezoflash4v5 ICSP connector. EZoSer works with any Willem software, latest have more updates. For serial part here is no differences in 0.98d12c3 or 0.97d12c3 use.
Note , EZoSer PCB has bug , missing bridge. Update existing pcb, many 25xxx devices are not supported without fix !

Re: EZoser2 programmer

Добавлено: Ср ноя 17, 2010 5:33 pm
tps_star
i connect this pin ?
in your schematic this 2 pin is connected but in your pcb not connect
pin3 dip8 connect to r16
ezoser is better or ezoser2 ?
i need just for program spiflash same as at26df161 or mx25l1605

Re: EZoser2 programmer

Добавлено: Ср ноя 17, 2010 6:06 pm
Ezo
ezoser is better or ezoser2 ?
It is the same design, differencies on Vpp components applied.
i need just for program spiflash same as at26df161 or mx25l1605
Should work on all willem compatible and 3.6V adapted programmers with latest SW.

Re: EZoser2 programmer

Добавлено: Чт ноя 18, 2010 4:44 pm
tps_star
hi ezo
i can not found max662a in my country
ezoser2 just add this ic for +12v vpp volt
spi flash no need vpp
vpp for icsp is used ?
and for programming pic ?

Re: EZoser2 programmer

Добавлено: Чт ноя 18, 2010 5:54 pm
Ezo
Don't apply Vpp components (+12V, MAX662). Programmer is oriented to SPI Flash. Not sure in PIC programming with EZoSer. Note design initially was for ezoflash4v5 test purposes only.

Re: EZoser2 programmer

Добавлено: Пт ноя 19, 2010 1:04 pm
tps_star
hi ezo
volt jumper setting ezoser is this :
jp1+jp3 = 5v
jp2 = 3v6

Re: EZoser2 programmer

Добавлено: Пт ноя 19, 2010 3:13 pm
Ezo
Yes, same as in ezoflash4v4/4v5
Additionally Jp1-Jp3 removed, Vcc=2.9V

Re: EZoser2 programmer

Добавлено: Сб дек 18, 2010 11:27 am
tps_star
smd Ezoser programmer picture
working perfect for spi flash memory