Forum ,
I am working on a one-off project concerning a 27c1024 plcc44 ( litteraly i need to read and write this eprom only once ) .
Before rushing to ebay and get a willem with all adapters i would like to know HOW i can read and write an 27c1024 plcc44
Anyone who can give me info on this ??
- How to do it ( read and write )
- What to buy ;
willem -> which version is the best ?
16 bit adapter -> which one 2 versions available
ofcourse 40 dip to plcc44 adapter
techy
== SOLVED == programming 27c1024 plcc44
Последний раз редактировалось techy Чт май 17, 2012 10:05 am, всего редактировалось 1 раз.
Re: programming 27c1024 plcc44
Any generic Willem programmer support 27C1024 with 16bit EPROM adapter.
Recomended versions pcb50 from Sivava, pcb50e.
Adapter sample find here
Recomended versions pcb50 from Sivava, pcb50e.
Adapter sample find here
Re: programming 27c1024 plcc44
ezo ,
Thanks for your answer .
I saw on ebay that there are 2 versions of the 16 bit eprom adapter .
Is there an important difference between the 16 bit adapter for < 4mb AND the adapter for > 4mb ??
Thanks for your answer .
I saw on ebay that there are 2 versions of the 16 bit eprom adapter .
Is there an important difference between the 16 bit adapter for < 4mb AND the adapter for > 4mb ??
Re: programming 27c1024 plcc44
Links ? Try find partner offering programmer and adapter.I saw on ebay that there are 2 versions of the 16 bit eprom adapter .
Here are adapters with and without PLCC44 sockets, with ZIF40 and/or ZIF42 , with DIP40 and/or DIP42 sockets. Your chip is 1Mb, DIP42 socket not compatible. Find support 27C1024.
Re: programming 27c1024 plcc44
Ezo ,
Thanks for this reply ,
indeed i found a seller offering both willem , AND dip40 adapter.
i hope these components are the right ones.
techy
Thanks for this reply ,
indeed i found a seller offering both willem , AND dip40 adapter.
i hope these components are the right ones.
techy
- Вложения
-
- plcc44 to dip 40.jpg (19.23КБ)3847 просмотров
-
- DIP40-EPROM lr.jpg (32.7КБ)3847 просмотров