AM29LV128ML113 EBGA64

[Albert-M]

Hello

possible to read and write this flash ic ? AM29LV128ML113 EBGA64

[Ezo]

Tricky !?
http://www.ezoflash.com/adapters/tsop48 ... _guide.pdf
Get a look to adapter fbga64_a1 supporting chip
S29GL128 in package FBGA-64 (LAA064, 13x11mm)
http://www.ezoflash.com/adapters/fbga64 ... 1_pics.zip

[Albert-M]

on the pictures u have Ebga64 adapter , i have same . all ebga -fbga64 are same pin

[Albert-M]

hello , all ok tested and work with AM29LV128ML113

[Albert-M]

Hi Ezo , i have problem with 29lg032 ot detected .
My adapter is ok working fine with gl128 , gl256 and 512

[Ezo]

i have problem with 29lg032 ot detected .

I suppose contact problem only , ID should be OK (0001, ...0 and not FFB7)
Strange chip model number S3 , not listed in datasheets. S3 can''t be a problem.

[Albert-M]

all contact cleared . with other chip work ok the programmer with L128ML

[Ezo]

id not correct. id command not recognised , chip return content from first adress.
B7FF content wrong. Suppose , it should be here FF FF.

[Albert-M]

what is the problem? my adapter or the chip is not suported?

[Albert-M]

pls help me how i can read this flash

[Albert-M]

i don;t know what is the problem ...

[Ezo]

Contacts
S3 as secured version
Damaged chip .

[Albert-M]

the chip is good when i solder back to device , the device work good , i need only to make backup

[Albert-M]

Contacts
S3 as secured version
Damaged chip .

Not possible to unprotect this chip? possible the chip is protected and not possible to read ?

[Ezo]

That is my presumption. No docs available describing model S3. Known 03,W3, R3.